KEB INDUSTRIES, INC.
2166 Joseph Lloyd Parkway
Willoughby, OH 44094
866.395.4438
                                                                                                                                                                                                         Fax 440.953.9209

 


MaswerksColletsGuide BushingsEmergenciesCustomsSaw ArborsCarbide Slitting SawsER Collets/ToolholdersKEB Cutting OilMisc. AccessoriesQuick Set Tool Blocks

 

HomeProduct CatalogContact InfoOrdering InfoRequest QuoteCopyrightFAQ

 
KEB COLLETS

GENERAL DESCRIPTION:
Collets are available in a variety of standard sizes and shapes for the headstocks and attachments.  Our collets are manufactured from a proprietary steel developed for its high harness and extreme wear resistance.  They are available in fractional, decimal and metric sizes. Standard stock includes round, hexagonal and square shapes.  Keyways are available upon request.

QUALITY:
KEB Collets are precisely ground to tolerance of .0005 or better Total Indicator Rating (TIR) and hardened to provide maximum wear and resistance.  Each Collet is specifically sprung for the ground diameter to hold your stock concentrically.

SERRATED:
Collets bores 1/2" and over are serrated to provide greater gripping power over your stock. Serrations are available on bores under 1/2", starting around 1/4" as non standard product.

SMOOTH BORE:
Standard Collets bores under 1/2" are smooth.

PICK-OFF COLLETS:
When ordering Pick-Off Collets, please specify smooth bore to prevent damaging any finished characteristics of your part.  Please refer to the Customs tab for more information about custom Pick-Off Collets.

EXTENDED NOSES:
Please specify EN when ordering Extended Nose Collets.  Refer to the Customs tab for more information on Extended Noses.

EMERGENCIES:
Emergency Collets are available for use until a hardened Collet is available.  Please refer to the Emergencies tab for more information.

HEXAGONAL & SQUARE:
Hexagonal Collets are available in various stock ranges as listed.



 
 


KEB COLLET SPECIFICATIONS

[Click buttons below for individual specifications]

MC13

MC15

MC16

MC18579

MC20-201

MC20

MC24

MC25

MC0161

MC30

MC32-221*

MC34

MC15

BS32C

MC37
 


CROSS REFERENCE TABLE

KEB Alternate
Part Numbers Part Numbers
B42 B42
BS32C BS32C
MC18579 F18-579
MC20-201 F20-201
MC32-221 F32-221
MC8 TF8
MC10 TF10
MC12 TF12
MC13 TF13
MC15 TF15
MC16 TF16
MC20 TF20
MC24 TF24
MC25 TF25
MC30 TF30
MC34 TF34
MC37 TF37
MC40 TF40
MC44 TF44
MC48 TF48
MC0161 0161